Logitek Ultra-VU LED Bargraph Audio Meter UV2-B Dual Input

Description

Logitek Ultra-VU LED Bargraph Audio Meter UV2-B Dual Input
The Logitek Ultra-VU is a bargraph type audio meter featuring two tricolor LED bargraphs with clip indicators
Two function buttons and several auxiliary data indicators are also included on the front panel.The Ultra-VU meter displays VU and peak levels on the same bargraph. Tri-color LEDs allow the VU level to be shown as a green bar and the peak level to be shown as a red dot. That way both levels can use the full meter range without confusion.
Specs
Bargraphs per meter: Two
Indicators per bargraph: 63
Normal Range:
-70 dB to 0 dB plus clip - digital
-50 dB to + 20 dB plus clip - analog
Fine Range:
.2 dB per segment around ref pt.
Reference Point:
-10,-12,-14,-16,-18 or -20 dB
Peak Markers:
8,9,10,12,14,16,18 dB above ref pt
Ballistics:
VU Mode             300 mS/20dB attack & release
PPM Mode       0 mS attack, 2.8S/24dB release
Peak Hold       0 mS attack, 2 or 5 Second hold
Max Hold         0 mS attack, pushbutton release
Image/Phase               4 Sec hold on max image
Clip Indicator:
trigger on 1 or 4 consecutive
clipped samples
Frequency Response:
Normal                           +/-.1 dB 20 Hz - 20 KHz
Loudness Filter           58 dBSPL auditory curve
-40 dB 20 Hz, 0 dB 1250 Hz, -50 dB 20 KHz
Brightness control:
8 levels
Analog Input:
Sensitivity               -10 to +20 dBu for full scale
rear panel adjustable
Overload Level                                       +24 dBu
Impedance                             40 Kohm balanced
Connector                                             3-pin XLR
Digital Input:
Formats                               AES/EBU or S/PDIF
Impedance                                   110 Ohm (XLR)
75 Ohm (coax adapter)
Pass-through                             2200 Ohm (XLR)
Termination                       transformer balanced
AC Line Input Voltage:
50-60 Hz                                     105-129 VAC or
(switch settable)                             220-240 VAC
Power Requirement:
UV1-(all), UDT-(all)                               10 Watts
UV2-(all)                                                 20 Watts